The HDSDI interface board TV80 0023 for Sony FCB-SE600 camera can synchronize the CMOS sensor on exposer as well as the digital video signal from the camera using a standard signal external sync input.
Contact usVideo output format | HD-SDI: 1080p30, 1080p25, 1080i60, 1080i50, 720P60, 720p50 |
Supply | 12 VDC, 6 W (including camera) |
Synchronization signal | Y HD video, Trilevel.800mV, 75 Ohms |
Synchronization time | 8 to 12s |
Camera control | RS232, RX, TX, VISCA |
Configuring the output video format | Software |
Operating temperature | 0°C to 60°C |
Storage | -20°C to 60°C |
The Sony FCB-SE600 camera implemented with the HD-SDI external synchrinzation module, easily allows to create 3D High Definition camera heads . It also allows for capturing a scene that is perfectly synchronized at multiple angles.
After automatic detection of an incoming sync signal, the camera will synchronize after ten seconds. The timing jitter is less than + or-20 nanoseconds.