More than a conversion and video transmission module, the 3G/HD-SDI Neo interface board is the heart of your industrial vision system. The module allows you to display High definition videos from OEM zoom bloc cameras and get an outstanding image quality.
The 3G/HD-SDI Neo module is built around a powerful FPGA from Lattice. On request, image processing functions such as colorimetry and measurement tests, reticles , contrast enhancement, region of interest extraction, OSD, can be implemented in real time.
Contact usDigital video output | 3G-SDI – HD-SDI |
Connector | BNC (SMB, MCX or no connector in option) |
Video output resolution | up to 1080p60 |
Video format configuration | DIP switches and/or VISCA software via Sony FCB control software |
Camera control settings | VISCA - RS232 / TTL configurable with DIP Switch |
Power supply | 7 to 12 VDC, 5W |
Operating temperature | 0°C to 60°C |
Storage temperature | -20°C to 60°C |
Regulation | EMC FCC part 15, PCB : UL94V0 |
Dimensions (mm) | 48 (H) x 45 (W) x 13 (D) |
Weight (g) | 15 |
3G-HD-SDI-Neo-Interface-board_Technical-manual | Link to documentation |
3G-HD-SDI-Neo-Interface-board_Product-brief | Link to documentation |
Serial digital interface (SDI) is a family of digital video interfaces standardized by SMPTE (The Society of Motion Picture and Television Engineers). 3G-SDI, is the most recent interface. Consisting of a single 2.970 Gbit/s serial link, It is standardized in SMPTE 424M. This standard is used for transmission of uncompressed, unencrypted digital video signal (optionally including embedded audio and/or time code) within television facilities
Two audio lines or microphone input are available in option. Line input : ( 47KOms impedance): 0dB level for a 18dBFs SDI signal. Variable gain from 97dB to +30dB Microphone input: Bias voltage can be adjusted until 2,3V for Electret microphones, max gain : +63dB Numerous audio functions can be managed by RS232 software with a VISCA ''like'' protocol. Stereo/ Mono / left / right ; two lines mixing.
The interface board automaticaly recognizes the SONY FCB Model and adapts its image processing to the SONY FCB SE 600, FCB EH range ( 6500,6300,3400,3300,3150), to the FCB-EV7500 and FCB-EV7100.
By adding a dedicated circuit for correction and stabilization of the Sony camera output clock, the interface board provides a high quality HDSDI signal. Characterized by a 'jitter' of less than 0.5 IU, lower than 300 ps rising ans falling edges, the 3Gb/s HD signal can be transported coaxial cables over 100 meters of High quality coxial cable.