Twiga USB3 Neo interface board is a tiny and easy to use USB3 video capture module for LVDS camera block including Sony FCB-EV7520A.
USB3 Neo operates as SuperSpeed USB3.2 and provides uncompressed HD video up to 1080p60.
A simple USB3 cable is enough to power supply, to control and to stream HD video from the camera. The camera settings (including video mode) can also be controlled by serial VISCA commands over local UART TTL or by using USB CDC control via the USB3 Micro b-Type connector.
This enables you to use standard application (i.e VLC, Amcap, Windows camera) for image capture, recording & viewing. It also allows to develop custom application and image processing based on DirectShow, GStreamer or OpenCV.
Last but not least, a board-to-board connector available on the back side of the USB3 Neo module will allow you to plug-in (custom) additional boards to get more capabilities (i.e Sony 4K camera compatibility) to best fit your specific expectations.
Contact usDigital video output | USB3.2 Gen 1 – UVC compliant |
Digital video output connector | USB3 micro B-type |
Video output format | up to 1080p60 |
Camera settings | VISCA protocol via USB CDC or UART TTL |
Power | USB3 cable, external camera supply only 6 to 12V DC |
Operating temperature | 0°C to 60°C |
Storage | -20°C to 60°C |
Regulations | EMC FCC part 15, PCB : UL 94 V0 |
Dimensions (mm) | 48 (H) x 45 (W) x 11 (D) |
Weight (g) | 13 |
USB3-Neo-Interface-board_User-Manual | Link to documentation |
USB3-Neo-Interface-board_Technical-Manual | Link to documentation |
USB3-Neo-Interface-board_Product-brief | Link to documentation |